The anniversary update for Windows 10 brought tons of improvement for the OS including a lot of issues fixes and improvements. Every gamer rushed to update it because there was this "hype" created that it brought about major changes to the Bone. Yet, like all new software, this wasn't without its problems. There were many controllers that were rendered as unusable after the update.

Since Xbox Ane is Microsoft's own flagship controller, it did work just had many problems too. One of the issues which the users experienced the most was that the controller would disconnect randomly after playing for long periods of time. Subsequently you plough information technology on, it volition function properly for a brusque fourth dimension earlier disconnecting again. This caused a lot of frustration amongst the gamers as Xbox One controller is one of the well-nigh used controllers in the gaming manufacture. Information technology behaving randomly and causing problems ways that y'all cannot use it without any interruptions as y'all did earlier.

We take listed down some of the fixes that you lot can try and implement on your PC. Before you go over this guide, refer to this one, and attempt the methods listed. If they don't work for you, y'all can always navigate back and try the solutions listed here.

Solution i: Disable NVIDIA wireless controller service

NVIDIA wireless controller service is installed past default whenever you install NVIDIA drivers to help you with your controller. Yous can configure settings and likewise implement buttons for ease of access.

It turns out that the NVIDIA wireless controller service conflicts with Xbox One controller. Tons of users reported that disabling the service instantly fixed their problem of the controller disconnecting over again and again.

Using Services.msc

  1. Launch the Run awarding (printing Windows + R push). In the dialogue box type "services. msc". This will launch the services which run on your PC.

  1. When in the services tab, scan through the services until you notice NVIDIA wireless controller service. Once yous find the service, right-click and select Properties from the list of options bachelor.
  2. One time the backdrop open, stop the service by clicking the push Stop. And then click on the Startup Type to bring about the drop-down carte. From the drop-down menu, click on Disabled. Salve changes and exit.

Using Chore Manager

  1. Launch the Run application (printing Windows + R push). In the dialogue box type "taskmgr". This will launch your computer'due south chore manager.
  2. Navigate to the services tab nowadays at the top and browse through the services until you find NVIDIA wireless controller service. Right click on the service and select Stop.

  1. This will instantly end the NVIDIA service. Y'all can also click the option of Open up services and set the startup options as mentioned in the guide above.

Using AutoRun

Autorun is a third political party application, which you can employ to see which processes and services launch whenever you lot beginning your PC. These services also include subconscious ones such every bit Cyberspace Explorer, File Explorer, etc. Nosotros can try disabling the NVIDIA wireless controller service using this software. When you disable an application from the AutoRun interface, it changes the registry and sets the application's value as 0, thus preventing it from running.

  1. Download the AutoRun application from here. Later on installing information technology and running it as an administrator, you lot volition see a window where all the system/normal applications will exist listed which run upon startup.
  2. In the dialogue box present at the top right side of the screen, type NVIDIA. All the NVIDIA processes and services will come up in front of you in a highlighted form.
  3. From all the list of NVIDIA services, search for NVIDIA Wireless Controller Service, right-click, and select Disable. Now the registry would exist edited for this specific service and information technology won't launch until you launch it manually.

Now restart your figurer, plug in your controller, and check if the problem nevertheless persists.

Solution 2: Uninstall NVIDIA Geforce Experience

Many Graphics hardware manufacturers traditionally offering a control panel where y'all can easily change the settings of your Graphics driver. There are basically two graphic control panels offered by NVIDIA. Ane is the classic NVIDIA Control Panel. You lot can access this by right-clicking on your Desktop and selecting the NVIDIA control panel. It has all the controls needed to tweak your gaming feel such as changing your refresh rate and removing shadows etc.

But the experience tin get overwhelming if you are not a geek and don't empathise the technical terms involved. That'due south where NVIDIA introduced the NVIDIA Geforce Experience. It is also a control panel just it is more user-friendly with some additional features as well such as ShadowPlay or Game streaming etc.

As we all know, these kinds of software have a lot of system settings at their disposal to ensure that your PC runs in the almost optimized mode possible. NVIDIA Geforce Feel is also known to cause issues and conflicts with your XBOX controller. You tin can attempt disabling it or uninstalling information technology to bank check if your problem gets resolved. If it does, you can switch to the classic control console for NVIDIA to modify your graphic settings or optimize your gaming experience.

If afterward uninstalling yous confirm that this isn't the problem, you lot can reinstall it very easily. The download link is readily bachelor in the NVIDIA official website.

  1. Open the Run awarding (press Windows + R key). In the dialogue box blazon "control console". Hitting enter and your estimator's control panel volition pop up.
  2. In the control console, click on "Uninstall a Program" from the listing of options available.

  1. Now all the programs installed in your reckoner will be in front of you. Browse through them until you observe NVIDIA Geforce Feel. Right click on it and select uninstall.

  1. Now NVIDIA will guide you through the process of uninstalling. Once the awarding is uninstalled, restart your computer, plug in your controller, and check if the connection error got resolved or not.

Solution iii: Quitting Steam

Steam is one of the largest digital distributors of video games in the globe. Their revolutionary idea led to the huge development of online video gaming. The trend started with PC games and eventually crept towards other platforms such as PlayStation and Xbox. Steam is a giant in harboring thousands of games and providing a platform for the developers to release them.

Still, despite frequent updates rolled out by the customer, there are many known conflicts. One of them existence with the Xbox I controller. Equally we all know, Steam has admission to all the major system hardware and services. It configures them to optimize the gaming experience information technology promises to its users. At that place is no known cause why this is so, simply disabling Steam and reconnecting the controller seems to exercise the fob.

  1. Disconnect your Xbox One controller from your computer. Make sure that information technology isn't connected.
  2. Open the Run application (printing Windows + R push. At present in the dialogue box type "taskmgr" to launch your reckoner task manager.
  3. Once it is launched, navigate to the Processes tab and search for Steam Client Bootstrapper. Stop the process before ending all the Steam processes ane by one.

  1. After you lot have ended all the processes, connect your Xbox I controller to your PC again and bank check if the problem however persists.

If the problem nevertheless persists, yous can attempt disabling Steam and NVIDIA Geforce experience (if y'all oasis't uninstalled it nevertheless). Y'all can end the NVIDIA Geforce experience procedure in a like way that we did to Steam. Just open the job manager and afterwards locating the process, terminate it.

Bank check if the controller stopped disconnecting randomly, if it however didn't, move on to the other solutions listed below.

Solution iv: Disabling Ability Saving for the Controller

At that place are enhancements made to the Windows OS to ensure that you get the optimum corporeality of ability-saving. Permit the calculator to turn off this device to salve power characteristic turns off/disconnects whatever device which is not in use for a specific menstruation of time. While this tin exist a very useful feature, it is a hurting when it comes to the Xbox I controller. One time the computer disables information technology, Xbox goes into a bewitched mode where afterward you even connect it, it will disconnect automatically after some time. Nosotros can try disabling this selection and checking if this solves the problem.

  1. Launch the Run application (press Windows + R button). Blazon in "devmgmt. msc". This volition launch your computer's device manager and all the devices connected to your calculator will be listed here. Ensure that y'all take connected your Xbox I controller prior to following this step so information technology shows up among the listing of devices.
  2. At present locate your Xbox One controller (it volition almost probably be in Xbox adapter windows). Once yous locate it, right-click on it and click on Properties.
  3. Once in the Properties, select the tab of Power Management. Here you will see ii tick boxes. The first i will say "Permit the computer to turn off this device to save power". Make sure that the selection is unchecked.

  1. Restart your computer and run into if the problem in question got resolved or not.

Solution 5: Checking your Xbox Ane Controller

At that place tin can be many cases where your Xbox One batteries are depression and because of that, the controller keeps shutting itself down again and once more. Y'all can effort checking the batteries if they working and replace them if they are weak. The controllers consume a lot of battery if they are in apply frequently so don't be alarmed if the new battery you just placed is nigh to drain style.

Xbox One Controller

You can likewise connect your Xbox One controller through USB instead of connecting information technology wirelessly. The USB connection ensures that your Xbox won't have any connection problems or interference. Nor will there be and so much battery drainage every bit the wireless choice won't be in use.

Next, you should bank check if your Xbox One controller software is updated. You can download Xbox accessories from the Microsoft shop and check if there are any updates bachelor for your controller.

Y'all can read the detailed guide on how to update your Xbox One controller from here. After updating the controller, implement the Solution # iv and disable the ability saving. And so restart your computer and connect your controller with your PC preferably through a USB. Check if the frequent disconnecting error got resolved.

Notation: Do note that sometimes, it is also the case where the game you are playing also configures the settings of the controller. It may put it in the power saver style or ready a timeout to disconnect the controller if y'all don't use information technology. Always bank check the game's settings and see if there are any settings present which may be causing the problem.

Solution 6: Updating NVIDIA drivers

Like we mentioned earlier, in that location tin be a conflict with NVIDIA and the Xbox Ane controller. A lot of people reported that NVIDIA acquired the problem in their PC's alongside Steam. The reason for this is that NVIDIA has access to nigh of the figurer'due south system files and configurations. It keeps changing and tweaking them to ensure that yous get the best graphic feel available from your PC.

Searching for drivers on NVIDIA'southward website

NVIDIA rolls out new drivers every once in a while which contains improvements and bug fixes. The issue between NVIDIA and the Xbox One controller can be resolved if the update contains the problems fix. So it is worth a endeavour to update the drivers.

Y'all can hands discover how to update your NVIDIA drivers from our article here. It is advised that your resort to the option of Clean Install while installing the drivers. Once you have updated the drivers, restart your figurer for the changes to accept consequence and check if the problem got stock-still.

Solution 7: Rdue east-enable the Game Controller in Device Manager

Another solution that users affected by these two issues have found quite constructive is going into their computer'sDevice Manager and and then disabling and re-enabling theGame Controller. In order to use this solution, y'all need to:

  1. Turn your Xbox One controller off.
  2. Press theWindows Logokey +R to open aRundialog, typedevmgmt. mscinto theRundialog and printingEnter to launch theDevice Manager. Alternatively, the same result tin too be achieved by simply correct-clicking on theStart Carte du jourbutton to open theWinX Menuand clicking onDevice Manager.
    Opening the Device Director
  3. Double-click on theHuman Interface Devicessection to expand information technology.
  4. Locate theGame Controllerunder theHuman Interface Devicessection, right-click on information technology and click onDisablein the resulting context menu.
  5. Once theGame Controller has been successfullydisabled, right-click on it one more than time, and this time click onEnablein the resulting context bill of fare.
  6. Wait for theGame Controllerto be successfullyenabled, and so close theDevice Manager.
  7. Plough your Xbox One controller on and connect it to your computer to see whether or not the consequence you lot were experiencing has been resolved.

Notation: If the problem still doesn't go fixed, endeavour plugging in another working Xbox One controller on your PC and check if it works properly. If the new controller doesn't take whatsoever trouble and doesn't disconnect like this one, it means in that location is some trouble with your controller and not with your computer. You tin can also try changing the USB ports to meet if there is any consequence. Endeavour changing between USB 2.0 and USB 3.0. Avoid plugging the controller in the USB hub which contains a lot of USB ports.

Solution 8: Moving away from Electrical Appliances

Another thing to try is moving the controllers away from whatsoever electric appliances. These appliances are known to emit waves that disrupt the operation of the controllers. Whenever in that location is a disruption when the controller is operating, the controller disconnects from the panel or the computer.

What you can do is observe side by side time whenever a call comes or you turn on your microwave. If you notice a pattern, either move the controller away or don't use the appliance when you are using the controller.